Hydrotrak Series- Liquid Cold Plates
D6's line of Hydrotrak liquid cold plates were designed to meet the pressing needs of very low thermal resistances, low flow, and low pressure drop requirements. The Hydrotraks are manufactured using square copper tubing connected with HydroTrak 'Direction Flow adapters' (patent pending).
This design allows D6 to places as many tubes side by side and any length required for each application. An assortment of individual standard HydroTraks can be embedded into a single large cold plate with single or multiple fluid paths.
Present standard designs include liquid cooling for devices that dissipate more than 100 watts per square inch of device surface area.
| Hydrotak Type | Positions | |||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | Other | |
| Power Resistors | NA | NA | NA | NA | HT-TAP1000-5 | NA |
| Power Diodes | NA | NA | NA | NA | NA | NA |
| Power IGBTs | NA | NA | NA | NA | NA | NA |
| Power Supplies | NA | NA | NA | NA | NA | NA |
| Solid State Relays | NA | NA | NA | NA | NA | NA |
| Custom Plates | NA | NA | NA | NA | NA | HydroTrak Main Flyer |