Non-Silicone Thermal Compound #111
D6# 111 is a non-silicone based thermal grease made from mineral fluids with metal oxide fillers. It has a grease-like consistency and an opaque white color. It is very stable at elevated temperatures with zero bleed.
D6 # 111 has excellent thermal resistance and high thermal conductivity. This compound can be applied by brushing, wiping or screening.
This compound contains the same properties as the most popular brands of Non-Silicone thermal grease on the market today, and the chart below shows the specifications and the standard packaging offered.
| Test | Test Method | Non-Silicone | Part # | Package |
|---|---|---|---|---|
| Appearance | Visual | White Paste | 111-04GB-D6 | 4 gm Blister |
| Consistency | ASTM-D-217 | 310-410 | 111-01ZS-D6 | 1 oz Syringe |
| Specific Gravity @25C | ASTM-D-70 | 2.7 | 111-02ZS-D6 | 2 oz Syringe |
| Bleed 24hrs % weight 150C 200C |
FTM-321 (MODIFIED) | NIL NIL |
111-05ZS-D6 | 5 oz Syringe |
| Evaporation 24hrs % weight 150C 200C |
FTM-321 (MODIFIED) | NIL 0.50 |
111-26ZS-D6 | 26 oz Syringe |
| Thermal Conductivity @36C CAL/SEC,CMC BTU.IN/(HR.FT2.F) W/m.K |
HOT WIRE METHOD PER Mil-C-47113 | 16.7 x 10-4 4.8 .70 |
111-08ZJ-D6 111-16ZJ-D6 |
8 oz Jar 16 oz Jar |
| Thermal Resistance C-mil/in2/W | -- | 0.024 | 111-O5PP-D6 | 5 lb Pail |
| Dielectric Strength Volts/Mil | ASTM-D-149 | 305 | 111-20PP-D6 | 20 lb Pail |
| Dielectric Constant 1000Hz @25C |
ATSM-D-150 | 4.5 | 111-40PP-D6 | 40 lb Pail |
| Volume Resistivity OHM-CM | ASTM-D-257 | 1.65 x 1014 | 111-80PP-D6 | 80 lb Pail |
| Operating Range,C | -- | -40 to 200 | 111-8PCD-D6 | 800 lb Drum |