< Back to Thermal Compounds

D6 THERMAL COMPOUNDS
101  102  103   104  105  106   108  109  110   111

D6 #102 Silicone Heat Sink Compound is a Silicone Based Thermal grease made from a silicone fluid with metal oxide fillers. It has a grease-like consistency, opaque white in color, zero bleed, very stable at elevated temperatures, excellent thermal resistance and high thermal conductivity. This compound can be applied by brushing, wiping or screening.            D6 #102 has the same properties as most of the popular brands of thermal compounds (grease). The following table presents these properties.

D6 THERMAL COMPOUND #102 
(A High Thermal Conductivity Compound)
Test Test Method Silicone   Part Numbers Package Size
Appearance Visual White Paste   102-04GB-D6 4 gm Blister
Consistency ASTM-D-217 250-350   102-01ZS-D6 1 oz Syringe
Specific Gravity @25°C ASTM-D-70 2.7   102-02ZS-D6 2 oz Syringe
Bleed 24hrs %
weight 150°C 200°C		 FTM-321 (MODIFIED) NIL
0.30		   102-05ZS-D6 5 oz Syringe
Evaporation 24hrs %
weight 150°C 200°C		 FTM-321 (MODIFIED) NIL
0.30		   102-26ZS-D6 26 oz Syringe
Thermal Conductivity
@36°C CAL/SEC,CM°C
BTU.IN/(HR.FT2.F)
W/m.°K		 HOT WIRE METHOD PER Mil-C-47113 43.5 x 10-4
12.64
1.82		   102-08ZJ-D6

102-16ZJ-D6

 8 oz Jar

16 oz Jar
Thermal Resistance °C-mil/in2/W -- 0.025   102-O5PP-D6 5 lb Pail
Dielectric Strength Volts/Mil ASTM-D-149 343   102-20PP-D6 20 lb Pail
Dielectric Constant
1000Hz @25°C		 ATSM-D-150 5.14   102-40PP-D6 40 lb Pail
Volume Resistivity OHM-CM ASTM-D-257 3.36 X 1013   102-80PP-D6 80 lb Pail
Operating Range,°C -- -55 TO 205   102-8PCD-D6 800 lb Drum