| < Back to Thermal Compounds |
D6
THERMAL COMPOUNDS D6 #103 Silicone Heat Sink Compound is a Silicone Based Thermal grease made from a silicone fluid with metal oxide fillers. It has a grease-like consistency, opaque white in color, zero bleed, very stable at elevated temperatures, excellent thermal resistance and high thermal conductivity. This compound can be applied by brushing, wiping or screening. D6 #103 has the same properties as most of the popular brands of thermal compounds (grease). The following table presents these properties. D6 #103 has a higher operating temperature range then the standard compounds. |
D6
THERMAL COMPOUND #103 |
|||||
| Test | Test Method | Silicone | Part Numbers | Package Size | |
| Appearance | Visual | White Paste | 103-04GB-D6 | 4 gm Blister | |
| Consistency | ASTM-D-217 | 250-350 | 103-01ZS-D6 | 1 oz Syringe | |
| Specific Gravity @25°C | ASTM-D-70 | 2.4 | 103-02ZS-D6 | 2 oz Syringe | |
| Bleed 24hrs % weight 150°C 200°C |
FTM-321 (MODIFIED) | NIL 0.20 |
103-05ZS-D6 | 5 oz Syringe | |
| Evaporation 24hrs % weight 150°C 200°C |
FTM-321 (MODIFIED) | NIL 0.50 |
103-26ZS-D6 | 26 oz Syringe | |
| Thermal Conductivity @36°C CAL/SEC,CM°C BTU.IN/(HR.FT2.F) W/m.°K |
HOT WIRE METHOD PER Mil-C-47113 | 18.7 x 10-4 5.4 0.78 |
103-08ZJ-D6 103-16ZJ-D6 |
8 oz Jar 16 oz Jar |
|
| Thermal Resistance °C-mil/in2/W | -- | 0.07 | 103-O5PP-D6 | 5 lb Pail | |
| Dielectric Strength Volts/Mil | ASTM-D-149 | 301 | 103-20PP-D6 | 20 lb Pail | |
| Dielectric Constant 1000Hz @25°C |
ATSM-D-150 | 3.98 | 103-40PP-D6 | 40 lb Pail | |
| Volume Resistivity OHM-CM | ASTM-D-257 | 5.59 x 1015 | 103-80PP-D6 | 80 lb Pail | |
| Operating Range,°C | -- | -40 to 250 | 103-8PCD-D6 | 800 lb Drum | |