< Back to Thermal Compounds

D6 THERMAL COMPOUNDS
101  102  103   104  105  106   108  109  110   111

D6 #108 Non-Silicone Heat Sink Compound is a Non-Silicone Based Thermal grease made from a silicone fluid with metal oxide fillers. It has a grease-like consistency, opaque white in color, zero bleed, very stable at elevated temperatures, excellent thermal resistance and high thermal conductivity. This compound can be applied by brushing, wiping or screening. D6 #108 has the same properties as most of the popular brands of thermal compounds made from Non-Silicone materials. The following table presents these properties.

D6 #108 has a thermal resistance that is 1/2 the standard compounds.

D6 THERMAL COMPOUND #108 
(High Thermal Conductivity Compound)
Test Test Method Non-Silicone   Part Numbers Package Size
Appearance Visual White Paste   108-04GB-D6 4 gm Blister
Consistency ASTM-D-217 250-350   108-01ZS-D6 1 oz Syringe
Specific Gravity @25°C ASTM-D-70 2.8   108-02ZS-D6 2 oz Syringe
Bleed 24hrs %
weight 150°C 200°C		 FTM-321 (MODIFIED) NIL
0.10		   108-05ZS-D6 5 oz Syringe
Evaporation 24hrs %
weight 150°C 200°C		 FTM-321 (MODIFIED) 0.10
0.50		   108-26ZS-D6 26 oz Syringe
Thermal Conductivity
@36°C CAL/SEC,CM°C
BTU.IN/(HR.FT2.F)
W/m.°K		 HOT WIRE METHOD PER Mil-C-47113 40.3 x 10-4
11.7
1.68		   108-08ZJ-D6

108-16ZJ-D6

 8 oz Jar

16 oz Jar
Thermal Resistance °C-mil/in2/W -- 0.025   108-O5PP-D6 5 lb Pail
Dielectric Strength Volts/Mil ASTM-D-149 302   108-20PP-D6 20 lb Pail
Dielectric Constant
1000Hz @25°C		 ATSM-D-150 4.5   108-40PP-D6 40 lb Pail
Volume Resistivity OHM-CM ASTM-D-257 1.65 x 1014   108-80PP-D6 80 lb Pail
Operating Range,°C -- -40 to 200   108-8PCD-D6 800 lb Drum