| < Back to Thermal Compounds |
D6
THERMAL COMPOUNDS D6 #110 Non-Silicone Heat Sink Compound is a Non-Silicone Based Thermal grease made from a silicone fluid with metal oxide fillers. It has a grease-like consistency, opaque white in color, zero bleed, very stable at elevated temperatures, excellent thermal resistance and high thermal conductivity. This compound can be applied by brushing, wiping or screening. D6 #110 has the same properties as most of the popular brands of thermal compounds made from Non-Silicone materials. The following table presents these properties. D6 #110 has the highest thermal conductivity and the lowest thermal resistance of all the compounds. |
D6
THERMAL COMPOUND #110 |
|||||
| Test | Test Method | Non-Silicone | Part Numbers | Package Size | |
| Appearance | Visual | Gray Paste | 110-04GB-D6 | 4 gm Blister | |
| Consistency | ASTM-D-217 | 250-350 | 110-01ZS-D6 | 1 oz Syringe | |
| Specific Gravity @25°C | ASTM-D-70 | 2.6 | 110-02ZS-D6 | 2 oz Syringe | |
| Bleed 24hrs % weight 150°C 200°C |
FTM-321 (MODIFIED) | NIL 0.30 |
110-05ZS-D6 | 5 oz Syringe | |
| Evaporation 24hrs % weight 150°C 200°C |
FTM-321 (MODIFIED) | NIL 0.60 |
110-26ZS-D6 | 26 oz Syringe | |
| Thermal Conductivity @36°C CAL/SEC,CM°C BTU.IN/(HR.FT2.F) W/m.°K |
HOT WIRE METHOD PER Mil-C-47113 | 59.9 x 10-4 17.4 2.51 |
110-08ZJ-D6 110-16ZJ-D6 |
8 oz Jar 16 oz Jar |
|
| Thermal Resistance °C-mil/in2/W | -- | 0.01 | 110-O5PP-D6 | 5 lb Pail | |
| Dielectric Strength Volts/Mil | ASTM-D-149 | 351 | 110-20PP-D6 | 20 lb Pail | |
| Dielectric Constant 1000Hz @25°C |
ATSM-D-150 | 5.29 | 110-40PP-D6 | 40 lb Pail | |
| Volume Resistivity OHM-CM | ASTM-D-257 | 1.16 x 1014 | 110-80PP-D6 | 80 lb Pail | |
| Operating Range,°C | -- | -40 to 200 | 110-8PCD-D6 | 800 lb Drum | |