< Back to Thermal Compounds

D6 THERMAL COMPOUNDS
101  102  103   104  105  106   108  109  110   111

D6 #111 Non-Silicone Heat Sink Compound is a Non-Silicone Based Thermal grease made from a silicone fluid with metal oxide fillers. It has a grease-like consistency, opaque white in color, zero bleed, very stable at elevated temperatures, excellent thermal resistance and high thermal conductivity. This compound can be applied by brushing, wiping or screening. D6 #111 has the same properties as most of the popular brands of thermal compounds made from Non-Silicon materials. The following table presents these properties.

D6 THERMAL COMPOUND #111 
(Superior Thermal Conductivity Compound)
Test Test Method Non-Silicone   Part Numbers Package Size
Appearance Visual White Paste   111-04GB-D6 4 gm Blister
Consistency ASTM-D-217 310-410   111-01ZS-D6 1 oz Syringe
Specific Gravity @25°C ASTM-D-70 2.7   111-02ZS-D6 2 oz Syringe
Bleed 24hrs %
weight 150°C 200°C		 FTM-321 (MODIFIED) NIL
NIL		   111-05ZS-D6 5 oz Syringe
Evaporation 24hrs %
weight 150°C 200°C		 FTM-321 (MODIFIED) NIL
0.50		   111-26ZS-D6 26 oz Syringe
Thermal Conductivity
@36°C CAL/SEC,CM°C
BTU.IN/(HR.FT2.F)
W/m.°K		 HOT WIRE METHOD PER Mil-C-47113 16.7 x 10-4
4.8
.70		   111-08ZJ-D6

111-16ZJ-D6

 8 oz Jar

16 oz Jar
Thermal Resistance °C-mil/in2/W -- 0.024   111-O5PP-D6 5 lb Pail
Dielectric Strength Volts/Mil ASTM-D-149 305   111-20PP-D6 20 lb Pail
Dielectric Constant
1000Hz @25°C		 ATSM-D-150 4.5   111-40PP-D6 40 lb Pail
Volume Resistivity OHM-CM ASTM-D-257 1.65 x 1014   111-80PP-D6 80 lb Pail
Operating Range,°C -- -40 to 200   111-8PCD-D6 800 lb Drum